Overview
This page explains which cryptocurrencies and networks are supported by the hardware wallet covered in this guide. I’ve tested dozens of chains over months and cross-checked protocol documentation and third-party wallet guides to make sure each statement below matches available integrations. What you’ll get: a practical map of where native on-device support exists, when a third-party wallet is required, and the typical limitations (staking, NFTs, privacy features).
I rely on protocol docs and wallet integration pages when I verify support (examples: Solana hardware wallet docs, Monero integration pages, ERC‑20 token standard). Links to chain docs and companion-app guidance appear where relevant.
How coin support works on the hardware wallet
Support generally arrives in two ways:
- On-device apps: a blockchain-specific app lives on the device and lets it sign that chain’s transactions. The private keys remain inside the device’s secure element (more on that below).
- Third-party wallet integration: a desktop/mobile wallet or browser wallet creates and formats complex transactions (DeFi trades, staking operations, NFT interactions) and sends the transaction to the device for signing.
But which method you get depends on the chain’s transaction format and ecosystem tooling. Some ecosystems (simple UTXO chains) map neatly to on-device apps; smart-contract-rich ecosystems often need a richer UI handled off-device.
And because the device only signs transactions (it doesn’t hold custody for you), you remain non-custodial—the private keys never leave the secure element.
(If you want the companion-app walkthrough, see the companion app guide: companion app guide.)
Major blockchains & token standards (at-a-glance)
| Network / token type |
How it’s commonly supported |
Notes |
| Bitcoin (BTC) |
On-device app + companion/desktop wallets |
Native support for transaction signing and multiple account types. Lightning requires node/third-party integrations. |
| Ethereum (ETH) + ERC‑20 |
On-device app + broad third-party compatibility |
ERC‑20 tokens are managed via Ethereum accounts; complex DeFi needs a browser/mobile wallet bridge (EIP workflows). See ERC‑20 spec (EIP‑20). |
| Solana (SOL) |
On-device app + Solana wallets |
NFTs, staking, and SPL tokens are supported through compatible Solana wallets. See Solana docs. |
| Cardano (ADA) |
On-device app + staking wallets |
Staking supported via compatible wallet integrations. |
| XRP (XRP) |
On-device app |
Basic send/receive supported; some advanced features handled by wallets. |
| Monero (XMR) |
Primarily via dedicated Monero GUIs |
Privacy-coin flows rely on Monero-specific wallet integration for signing. |
| Tezos, Polkadot, Tron, Stellar, Zcash |
Mix of on-device and wallet-based support |
Feature availability (staking, tokens) varies by ecosystem and wallet. |
This is a summary. For full, current lists check the companion app and the chain-specific guides like the Ethereum guide and the Solana guide.
Solana, Monero, and special cases
A few ecosystems deserve a dedicated note because they frequently cause confusion.
- Solana — Does the device support Solana? Yes. The device can sign Solana transactions via the Solana on-device app and compatible wallets (developer docs: https://docs.solana.com/wallet-guide/hardware-wallets). NFTs and staking are possible, but wallet UX varies.
- Monero — Privacy coins are different. Monero support typically requires a Monero GUI that delegates signing to the hardware wallet; the heavy privacy logic remains in the Monero wallet software (see the Monero resource pages at https://www.getmonero.org/resources/user-guides/).
Why call these out? Because they show the two support models: Solana can be used for NFTs/staking via standard wallets, while Monero requires specialized client software due to its privacy design.
Third-party wallets and when you need them
Many advanced features are only available through third-party wallets:
- DeFi (smart-contract interactions) usually needs a browser or mobile wallet bridge.
- Some staking flows (Cardano, Polkadot) require an integrated staking wallet.
- Privacy coins (Monero) need dedicated GUIs.
I noticed during testing that browser-wallet bridges provide the richest feature sets, but they also require higher operational caution: always review transaction details on the device screen before approving. For setup steps with common browser/mobile integrations, see the browser-wallet integration guide (/metamask-setup).
Multi-signature and advanced workflows
Multi-signature (multisig) increases security by requiring multiple signatures for a spend. Many hardware wallets participate in multisig setups via third-party software (Electrum, Sparrow and other multisig tools). Multisig reduces single-point-of-failure risk but adds operational overhead (backups, geographic key placement, inheritance planning).
I believe multisig is worth the work for treasury accounts or high-value holdings. But for small personal savings, a single-device setup with good backups is often sufficient.
For compatibility details and recommended workflows, see the multisig compatibility page (/multisig-compatibility) and the multisig setup walkthrough (/multisig-setup).
How to check support and add an account — step by step
- Open the companion app on desktop or mobile and go to Add Accounts / Apps (companion app guide or add accounts and apps).
- Search for the network you need in the app’s supported list.
- If an on-device app exists, install it and add the account in the companion app.
- For tokens (ERC‑20 or SPL tokens), add the parent chain account (Ethereum or Solana) and then add or track tokens in the companion or third-party wallet.
- If the coin isn’t in the companion app, check chain-specific wallets (e.g., Solana wallets, Monero GUI).
If you’re new, follow the initial setup and recovery guides first: setup-initial and restore-recovery.
Security, firmware, and connectivity notes (what to verify)
- Firmware: Keep device firmware up to date. Updates can add support for new chains and fix security issues; verify updates according to the firmware verification guide (/firmware-updates, /verify-firmware).
- Secure element: Private keys live in a tamper-resistant secure element on the device; that hardware boundary is the security model. See the secure element explanation (/secure-element).
- Connectivity: USB has the smallest attack surface. Bluetooth is convenient for mobile, but it increases exposure. (See connectivity comparison in /connectivity-usb-bluetooth-nfc.)
- Passphrase (25th word): This optional extra creates a hidden account. Treat it like a password—store it separately from your seed phrase (recovery phrase) and plan recovery carefully (/passphrase-25th-word).
Who this hardware wallet is best for — and who should look elsewhere
Best for:
- Long-term holders who want cryptographic control of private keys.
- Users who will accept basic device and companion-app management.
- Anyone who wants to use third-party wallets for staking, NFTs, or DeFi while keeping keys offline.
Who should look elsewhere:
- Users who prefer custodial services or won’t manage seed backups.
- Teams needing dedicated institutional custody products with built-in multi-user workflows.
FAQ
Q: Can I recover my crypto if the device breaks?
A: Yes — restore using your recovery phrase on a compatible device or recovery tool. See the restore guide (/restore-recovery).
Q: What if the device maker goes out of business?
A: Because crypto is non-custodial, your recovery phrase (and passphrase, if used) lets you recover funds using compatible wallets. See company-failure recovery notes (/company-risk, /backup-and-recovery).
Q: Is Bluetooth safe?
A: It can be, but it expands the attack surface. For maximum safety use USB and keep your threat model in mind (/connectivity-usb-bluetooth-nfc).
Final thoughts and next steps
Support is more than a checkbox — it’s how you’ll use a coin (HODL, stake, trade, NFTs). Start by listing the chains you need, then verify whether the companion app supports them natively or whether a third-party wallet is required. In my testing, planning backups (seed phrase, metal backup plates) and deciding on passphrase (25th word) usage before moving funds prevents common headaches.
Ready to proceed? Check the network-specific guides: Ethereum guide, Solana guide, Monero guide, and follow the initial setup steps at setup-initial.
And remember: support is not just whether a coin can be stored — it’s whether the workflows you rely on (staking, DeFi, NFTs, multisig) are supported in a way you can manage securely.
